+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Junior Member level 1
    Points: 474, Level: 4

    Join Date
    Sep 2010
    Posts
    17
    Helped
    0 / 0
    Points
    474
    Level
    4

    port details of vivaldi antenna

    hi
    We are designing single element vivaldi using CST.
    We are getting problem with port . The error message is " waveguide to port 1 is too short, The waveguide must be homogeneous with three mesh planes" . please reply me how to solve that error
    Mail me to divyaram83@yahoo.co.in

    •   AltAdvertisment

        
       

  2. #2
    Advanced Member level 2
    Points: 4,716, Level: 16
    Achievements:
    7 years registered

    Join Date
    Mar 2009
    Posts
    559
    Helped
    192 / 192
    Points
    4,716
    Level
    16

    Re: port details of vivaldi antenna

    hi
    that is an unusual problem in simulation of antenna and that occur in CST
    i can guess u antenna has and taper feed line and the this problem came from that for solve this problem u should made it straight for 3 mesh of CST simulation



    •   AltAdvertisment

        
       

  3. #3
    Newbie level 1
    Points: 309, Level: 3

    Join Date
    Apr 2011
    Posts
    1
    Helped
    0 / 0
    Points
    309
    Level
    3

    Re: port details of vivaldi antenna

    Hi,
    I met this problem before.
    It may happen when the micrsostrip line doesn't properly touch the edge of the substrate. That is to say, the edge of the ms line and the edge of the substrate do not meet.
    Sorry for my poor English~



--[[ ]]--