Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

10 to 1000 MHz TO-8 cascadable amplifier

Status
Not open for further replies.

Rubby

Newbie level 6
Joined
Dec 15, 2010
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,378
Features of **broken link removed** are:(1)available in surface mount; (2)high output power: +22.5 dBm typ; (4)high third order I.P.: +35 dBm typ; (4)medium noise figure: 6.0 dB typ.

The absolute maixmum ratings of WJ-A19-1 can be summerized as:(1): stroage temperature is -62℃ to +125℃; (2): maximum case temperature is 125℃; (3): maximum DC voltage is +17 V; (4): maximum continuous RF input power is +13 dBm; (5): maximum short term RF input power( 1 minute max) is 100 milliwatts; (6): maximum short term RF input power is 100 Milliwatts(1 minute max); (7): maximum peak power is 0.5 watt(3 usec max); :) "S" series burn-in temperature(case) is 125℃.The specifications of WJ-A19-1 can be summerized as:(1): frequency.min is 10 to 1100 MHz typ; (2): small signal gain.min is 11.5dB typ; (3): gain flatness max is less than ±0.2 dB; (4): noise figure max is 6.0 dB(30 to 600 MHz); (5): power output at 1 dB compression min is +22.5 dBm; (6): DC current max at 15 volts is 90 mA.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top