Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Wireless access network simulation?

Status
Not open for further replies.
L

lolypop

Newbie level 5
Joined
May 13, 2010
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
kuwait
Activity points
0
Hello everyone,
I have been trying to simulate a wireless access network with dynamic base station switching using matlab but to be totally honest with you I don't know where to start .
The simulation parameters for the system are as follow :
1.FDMA 2.C=30 channels .
3.BW=10MHz
4.Radio frequency=2.3GHz
BS Pt=43dBm
Noise power=-176dBm/Hz
data rate= 256 kbps
Using M-QAM with BER=10^-6 with channel model : log-normal shadowing
Could anybody at least give me a hint where to start exactly . I'd really appreciate it :cry:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top