Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Which one is better for audio: ICL8038 or MAX038?

Status
Not open for further replies.

ravioza

Newbie level 2
Joined
Jun 3, 2004
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
26
which solution is better for audio? ICL8038 or MAX038?
 

icl8038 function generator

MAX038 because IC8038 is very old
 

site:www.edaboard.com fuction generator

And you can get MAX038 at MAXIM website for free!! 8O 8O
 

introduction of tri-waveform generator

Hi !

Another solution is XR2206 from Exar. It is not so expensive as MAX038 is and has a very good performance.

RK
 

xr2206 function generator

djalli said:
where I can find ICL8038? Does Intersil gives samples?

It is very cheap. It is better buy.
 

do i need a function generator

From April it is out of production
 

xr2206 generator

8) What waveform do you want to generate. even descrete methods can be used .
 

xr2206 waveform generator

icl8038 is cheaper than max038.
for audio,icl8038 is enough
 

introduction of ic8038

Do you need a variable function generator or do you need to impliment a single tone?

Various opamp configurations can be used to generate sine, square and triangle waveforms.

I've worked with the MAX038 as well - very cool chip.
 

tri waveform generator

If you only do one for yourself,you can request a sample from maxim website.
 

function-generator icl8038

XR2206, besides that its cheap, output waveform are triangular, square, and sinusiodal.

kaiji
 

where can i get max038

Max 038 is the intelligent choice, you can find it at futurlec.com
 

do it yourself function generator

I'm working on a project with MAX038. Like someone says a few post before me, it's a very cool chip! But the question was, which is better for audio, so maybe ICL8038 is better! ICL8038 is cheaper, needed less external components and it work in 0,01Hz to 300kHz, which is nearer to your range (max 20kHz).
 

function generator 8038

yes .... the XR2206 is good chip
 

function generator schematic diagram xr 2206

ravioza said:
which solution is better for audio? ICL8038 or MAX038?

ravioza, you are in the wrong topic. This topic is 'Function Generator'

Create a new topic with 'audio' or whatever...
 

xr2206 buy

MAX038 because IC8038 is very old
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top