Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS 12 Terminal Line, HELP PLEASE, URGENT

Status
Not open for further replies.
H

Hamid.Kiumarsi

Full Member level 2
Joined
Aug 18, 2010
Messages
142
Helped
33
Reputation
66
Reaction score
31
Trophy points
1,308
Location
Japan
Activity points
2,232
Hi

I couldn't find terminal line in HFSS 12!
Is there anybody who has defined terminal line on HFSS 12?

I am designing edge-coupled 3dB quadrature coupler. In each side of this coupler I have 2 close transmission lines.

From the topics on the forum I found that I should use driven terminal since I have coupled lines. (am I right?)
Since transmission lines are very close to each other, I am assigning one wave port for each side an then one terminal for every transmission line. This means I have two terminal at each port.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top