Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

E1 -> modem -> RS-232 questions

Status
Not open for further replies.
Black Jack

Black Jack

Full Member level 4
Joined
Dec 2, 2003
Messages
236
Helped
14
Reputation
28
Reaction score
3
Trophy points
1,298
Location
UKRAINE
Activity points
1,817
I need chip (chipset) for task described below:
I have one PCM time-slot from E1 stream.
I wish to support modem protocol from
this time slot and transfer data to RS-232 I/F.

How can I do it?
 

you can try motorola MPC82xx family.
Is not a chipset but a micro.
You need also a line interface for E1,and a Flash or RAm.
Another way is to use a Liu/framer and if you use HDLC on E1 find one whit HDLC (infineon or maxim and others) and after a micro cheapest.
I don't think that exist chipset that perform your project.
Bye.
 

tlp71@hotmail.com said:
you can try motorola MPC82xx family.
Is not a chipset but a micro.
You need also a line interface for E1,and a Flash or RAm.
Another way is to use a Liu/framer and if you use HDLC on E1 find one whit HDLC (infineon or maxim and others) and after a micro cheapest.
I don't think that exist chipset that perform your project.
Bye.
Click to expand...

I already have ST-BUS I/F (64 kbs) with one timeslot for modem connection.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top