Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to define for "Freq" and "Noise" of vdc source in analogLib , cadence

Status
Not open for further replies.

mooner

Junior Member level 3
Joined
Mar 13, 2006
Messages
27
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Location
Nanjing.China
Activity points
1,417
How to define for "Freq" and "Noise" of vdc source in analogLib , cadence

when i do phasenoise simulation in VCO, i find that filling some value in "freq" and "noise" for example 1 and 1, the result of phasenoise entirely changed.
So i doubt what value in those box is reasonable. the doc of cadence gives almost no comment.
anyone could please tell me if you know, thanks
 
Last edited:

Re: How to define for "Freq" and "Noise" of vdc source in analogLib , cadence

thanks!
but how to use VCO_workshop? i have thought that it is a doc, but it seems like a software, when i unzip it.
BTW, what's the meaning of HTH?

---------- Post added at 03:24 ---------- Previous post was at 02:03 ----------

hi, Erikl:

the question of VCO_workshop is clear.
 

Re: How to define for "Freq" and "Noise" of vdc source in analogLib , cadence

---------- Post added at 03:24 ---------- Previous post was at 02:03 ----------
hi, Erikl: the question of VCO_workshop is clear.
Good!

BTW, what's the meaning of HTH?
See e.g.
 
  • Like
Reactions: mooner

    mooner

    Points: 2
    Helpful Answer Positive Rating
Re: How to define for "Freq" and "Noise" of vdc source in analogLib , cadence

I see.
HF.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top