Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me select a varistor for my application

Status
Not open for further replies.
J

Jean Bernier

Newbie level 1
Joined
Sep 14, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Rosemere, Quebec
Activity points
1,287
Hello

I am new here and my question is, how to select a varistor for the following application.
I have an X-ray collimator which is supplied with 24 VAC and inside a 24V 150Watt bulb which is turn on by a Triac in serie with a varistor.
When the bulb is turn on the current inrush is dampened by the varistor who now support a current of 6 amps.

Which part should i buy to replace that blown -out varistor
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top