Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

problem with data transfer after connecting two pc's with rs 232 null modem cable

Status
Not open for further replies.
P

pavan_85

Member level 1
Joined
Jul 3, 2008
Messages
33
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Location
hyderabad
Activity points
1,497
Hi all,
We have connected two PC's with a RS232 null modem cable.
we wanted to transfer data between these two pc's.
The problem is that when we opened the HYPER TERMINAL of these two pc's, we were able to establish a UNI-DIRECTIONAL data transfer, instead of a BI-DIRECTIONAL data transfer. We have checked the cable, our port settings and all other stuff, but cant get a solution for this.....

Please help us out...

regards,
pavan
 

We have checked the cable, our port settings and all other stuff, but cant get a solution for this.....
Click to expand...

If all of the above is true, double check and make sure that FLOW CONTROOL (Port Settings-Properties) in both computers is set to NONE ..

IanP
:grin:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top