Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with wiznet w5300

Status
Not open for further replies.
H

hamed_sotoudi

Full Member level 3
Joined
Aug 1, 2007
Messages
156
Helped
15
Reputation
30
Reaction score
4
Trophy points
1,298
Location
Germany Hamburg
Activity points
2,195
hi guys,
I have a board that it has a w5300 on it and FPGA spartan3 1500. I wrote a driver with vhdl for it and it works well but when I close socket when recieving FIn packet and then reopen it I cant get any data from computer. w5300 gets data and its leds turn on but when I check recieve buffer size I get zero. what is the problem?
 

Hi
I use WIZ830 (TCP/IP module with W5300) and drive it by FPGA(SP3) It work perfectly (up to 50Mbs) but idon't have any problem like that.If you tell more details I can help you.
 
can you help me, I can not make the driver of w5300 from the Xilinx spartan 3
Can you share your project to me?
 

somebody could help me with the driver, or better with the project?
 

can you help me, I can not make the driver of w5300 from the Xilinx spartan 3
Can you share your project to me?
 

Can you send me the source in HDL for the w5300? Thank you!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top