Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Program for converting the gerber files to PowerPCB files?

Status
Not open for further replies.

ruggine

Junior Member level 3
Joined
Nov 29, 2002
Messages
27
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,281
Activity points
117
camtastic bmp import

hi
does someone know a program to convert the files gerber to file powerpcb?
 

gerber to pcb

i have not seen that .. i have seen utility to convert bmp (bitmap) to protel file .. but it could be way fory you .. just save gerber as bmp (layer by layer)
and convert .. maybe you can import protel file ;0))
 

Re: gerber to pcb

If I'm right PCAD's Camtastic can do that.


Mr.Cube
 

gerber to pcb

gerber to powerpcb is possible but u will lose some paramters durring conversion process
u can use cam350 for conversion by creating netlist and so on....
but it is not a good suggection since chances of hidded error

binu
 

Re: gerber to pcb

If you want any of layer as a reference for routing . you can convert ther gerbr in to dxf using"GerbTool" and can import as dxf.

rishab
 

gerber to pcb

mr . rishabkailas do u think that u can edit the dxf file in the powerpcb any logic is imported with dxf.
try

binu george
 

Re: gerber to pcb

Most CAM tools capable of grouping objects to create parts can do this.

First you load gerbers & drill
Define parts etc
Then extract netlist

For Power PCB you would be best to use a Gerber editor which will export a native PPCB file such as Cam350 from Downstream.

You will not find any free veiwer I know of that will do this easily.
 

Re: gerber to pcb

i would like to import a gerber design into eagle. has anybody done this with success?
 

Re: gerber to pcb

hi sinanweb,
can you tell me how you convert a gerber-file to eagle with isopro?
greez, ep20k.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top