Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

High side FET gate driver

Status
Not open for further replies.
E

eem2am

Banned
Joined
Jun 22, 2008
Messages
1,179
Helped
37
Reputation
74
Reaction score
24
Trophy points
1,318
Activity points
0
Hello,

I wish to drive a 330mA , 24V LED string from a 35V rail using a buck converter.

i need a ground referenced current sense resistor in series with the LEDs, -so need a high-side FET.

There appears to be no single high side drivers available for this purpose.....
at least not ones that are cheap.

LTC4440 is ok but far too expensive.

NCP3065 is the right price but is a high side driver with a buck controller itself...and i can't use its control algorithm (PFM with no frequency compensation) since i will get oscillations.

I would prefer a charge pump style NFET driver with a bootstrap cap.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top