temporysing
Newbie level 3
- Joined
- Jun 4, 2009
- Messages
- 4
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- new york, USA
- Activity points
- 1,309
I'm currently working on a wireless battery charger circuit.I need some help figuring out why I have a particular problem and any means of solving it.
In the attached simplified schematic, you will see a PLL controlling pulsed charging of a battery which is powered by a class E supply, regulated and through a buck boost to keep voltage stable at 5V. I need help eliminating the back powering from the battery to the buck boost which is creating a voltage which resembles a pulse on top of a DC value of 4.8V(pulse is of amp. 0.2V) at the point labelled as A.
I need to use a switch but I cannot afford to have a voltage drop across it.
Any ideas will be appreciated.
In the attached simplified schematic, you will see a PLL controlling pulsed charging of a battery which is powered by a class E supply, regulated and through a buck boost to keep voltage stable at 5V. I need help eliminating the back powering from the battery to the buck boost which is creating a voltage which resembles a pulse on top of a DC value of 4.8V(pulse is of amp. 0.2V) at the point labelled as A.
I need to use a switch but I cannot afford to have a voltage drop across it.
Any ideas will be appreciated.
