Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

DRC error - can not build VDB file,failed DRC run

Status
Not open for further replies.

lokesh garg

Member level 5
Joined
Aug 25, 2009
Messages
87
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Location
india
Activity points
2,179
DRC error

i m having error while i m running DRC.. error is can not build VDB file,failed DRC run... plz help me...plzzzzzzzzzz
 

To overcome this problem you need to do a small change in the DRC rule file.First go to /RuleDecks/Assura/DRC, then open
"G-DF-MIXEDMODE_RFCMOS18-1.8V-3.3V-1P6M-MMC-Assura-drc-2.10-p1.rul" file -> go to the last line which is "load( "./DRC/G-DF-LOGIC18-1.8V-3.3V-1P6M-Assura-drc-memory.rul" )".
Instead of "./" you give the full path of the file. For example
"load( "/cad/umc_180/RuleDecks/Assura/DRC/G-DF-LOGIC18-1.8V-3.3V-1P6M-Assura-drc-memory.rul" )". Hope this will work.
 
Thanks a lot for your suggestion, skpatnaik!
Actually I had 3 lines to be changed to the correct directory in the rule file. Now my DRC works!!!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top