Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

great difference between the simulation results of HFSS&

Status
Not open for further replies.
S

sonofsky

Junior Member level 2
Joined
Jun 3, 2009
Messages
22
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,421
Hello,everyone.

I want to design a W-band E-plane waveguide bandpass filter, I adopt HFSS and CST to analyze the filter with the same structure parameter, but the results show great difference, they are totally different.

The attachment is the projects of HFSS and CST.

Can anyone give me some advice?

Thank you!!!
 

Re: great difference between the simulation results of HFSS&

sonofsky said:
Hello,everyone.

I want to design a W-band E-plane waveguide bandpass filter, I adopt HFSS and CST to analyze the filter with the same structure parameter, but the results show great difference, they are totally different.

The attachment is the projects of HFSS and CST.

Can anyone give me some advice?

Thank you!!!
Click to expand...

I believe you HFSS design differs from the CST MWS.

Somethings I noticed.
1.You have no boundaries for HFSS
2.Wave port excitation into vacuum with no conducting boundaries in HFSS
3.You are essential exciting a mode into a vacuum waveguide? Can it maintain this mode???
 

tekz, thank you for your replying.

1. according to the help document of HFSS, its background will be set to be PEC automatically. So since it's a waveguide, I think I can let the boundary empty.

2. I remenber that if the waveport was defined totally in the boundary, then a conducting boundaries should be defined to shield it……

If you have some useful materials, would you please share them with me?
 

Re: great difference between the simulation results of HFSS&

@ sonofsky:
how did u convert the HFSS file for opening in CST format???
 

Hi can you explain me how I can import,convert HFSS project to CSTs
 

They look pretty similar to me.
 

hello all
in hfss file solution frequency is 94GHz but in frequency setup it selected between 1 and 10 GHz(!!!!!)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top