Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

UC3844 based design - help needed

Status
Not open for further replies.

dipnirvana

Full Member level 4
Joined
Jan 23, 2009
Messages
210
Helped
26
Reputation
52
Reaction score
4
Trophy points
1,298
Location
India
Activity points
2,296
UC3844 based design

Our Input specification of flyback smps is 60VAC to 300VAC and output is 5V at 200mA.

Now to startup the UC3844B, bias current require is 0.5mA, so the startup resistor will be 100K. But at maximum input voltage that’s 300VAC (424VDC) , power dissipated will be 1.5W .


Now this too much of power dissipation for the 2W(output) requirement .

Please help.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top