Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Any way to remove silk screen from a pcb?

Status
Not open for further replies.
J

JMG

Member level 3
Joined
Sep 27, 2005
Messages
66
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,908
Not sure where to ask this.

I have several PCB's that were designed for a customer that have their logo on the silk screen. They have now changed names and would like the old logo off the pcb. There are only maybe 200 pcb's and then we go to a new revision so we dont want to have 200 boards made up with the old designs, just to replace them later with a new design.

And yes due to contract reasons, we have to use the current designs for the next 200 assemblies. Bummer.

PCB's are black mask, white silk.

Thanks.
 

Try with paint remover, normally it will go off.

Another thing you can do is mask the logo with same color over that

Nandhu
 

hi,
paint remover method is good.
And one thing just u make the another logo silk screen Gerber.
first remove the old pcb logo in ur pcb and put the new logo where u want.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top