biff44
Advanced Member level 6
- Joined
- Dec 24, 2004
- Messages
- 5,047
- Helped
- 1,376
- Reputation
- 2,748
- Reaction score
- 1,056
- Trophy points
- 1,393
- Location
- New England, USA
- Activity points
- 37,908
pressure vessel
I have a large steel pressure vessel at 100 PSIG with gases inside. Gas temeprature might be 600 degrees F.
I need to pass a long rotating ceramic rod, perhaps 1/2 inch diameter, through the side wall of the vessel. I am looking for a rotating bearing that can hold the rod at the vessel wall, allow it to rotate, but be gas-tight. Rotation rate will be around 10 RPM.
Any suggestions?
Thanks for the help.
Rich
I have a large steel pressure vessel at 100 PSIG with gases inside. Gas temeprature might be 600 degrees F.
I need to pass a long rotating ceramic rod, perhaps 1/2 inch diameter, through the side wall of the vessel. I am looking for a rotating bearing that can hold the rod at the vessel wall, allow it to rotate, but be gas-tight. Rotation rate will be around 10 RPM.
Any suggestions?
Thanks for the help.
Rich