+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Newbie level 3
    Points: 619, Level: 5

    Join Date
    Jul 2009
    Location
    India
    Posts
    3
    Helped
    0 / 0
    Points
    619
    Level
    5

    sms remote control

    I know that I will have to connect Tx of mobile with Rx of 89C51 & Rx of mobile with Tx of 89C51. But, I don't know for my mobile set Nokia 6080 which pins are the Tx & Rx. Please help me regarding this. I have googled on the topic, but have not get enough help. Anyone who does not know for 6080, but knows for any other set also suggest.

    •   AltAdvertisment

        
       

  2. #2
    Full Member level 1
    Points: 4,281, Level: 15
    Achievements:
    7 years registered
    microcon555's Avatar
    Join Date
    Feb 2009
    Posts
    103
    Helped
    9 / 9
    Points
    4,281
    Level
    15

    remote controlling using microcontroller




    •   AltAdvertisment

        
       

  3. #3
    Advanced Member level 3
    Points: 7,315, Level: 20

    Join Date
    Apr 2005
    Posts
    881
    Helped
    128 / 128
    Points
    7,315
    Level
    20

    remote control using 8051

    As I can see from the link posted by microcon555, the cable is USB and, I think that you can't just connect the cable to the microcontroller and expect everything to work fine.
    The mobile is expecting a communication from a USB device (Computer). This USB communication requires more than just a simple connection. I mean, you can't just replace the computer with a microcontroller. You need some more peripherals to interface the microcontroller to the mobile via USB port.
    For more details about this issue, check the following topic.
    https://www.edaboard.com/viewtopic.p...&highlight=usb

    I hope this helps.
    Good Luck



--[[ ]]--