Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

why current is increasing in my ckt

Status
Not open for further replies.
B

BABESH

Full Member level 2
Joined
Sep 27, 2005
Messages
146
Helped
14
Reputation
28
Reaction score
4
Trophy points
1,298
Activity points
2,216
Hi,
Opamp tlc27l1 o/p is connected directly to MOSFET 2N7002, without any resistors in between. Opamp o/p is high. Vcc=9V.
without mosfet i see that current consumed is <500uamp, but when mosfet is connected then current increase to 2-3 mamp,
does mosfet consume any current to operate at gate terminal?
 

If the OP is operated with a feedback, parasitic oscillations due to the capacitive load may occur.
 

Hi Tkx for the reply,

Opamp is operated as comparator and tested with and without feed back element.

please see the ckt diagram attac.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top