jitendravlsi
Full Member level 2
As I do the static power analysis after Post Route it results in error as:
*****************************
Constructing power graph for P/G net VDD ...
INFO (SOCPARA-4303): Using voltage 1.98 V for all instances of net VDD.
For Net VDD Instance Voltage Values:
472 instances at 1.98 V
Reading TCF netFreq.tcf...
found 54 nets have switching information out of total 532 nets
**WARN: Only 10.15% of nets have toggling information from TCF
Please check if top module is correct or add -top <module> option
**ERROR: Failed to find any DC Source reference node for this VDD net.
*** Power analysis (cpu=0:00:00.1 mem=237.3M) ***
ERROR (SOCPARA-2056): Check error messages for power net VDD
*********************************
Please let me know where am I going wrong?
Thanks All!
Jitendra
*****************************
Constructing power graph for P/G net VDD ...
INFO (SOCPARA-4303): Using voltage 1.98 V for all instances of net VDD.
For Net VDD Instance Voltage Values:
472 instances at 1.98 V
Reading TCF netFreq.tcf...
found 54 nets have switching information out of total 532 nets
**WARN: Only 10.15% of nets have toggling information from TCF
Please check if top module is correct or add -top <module> option
**ERROR: Failed to find any DC Source reference node for this VDD net.
*** Power analysis (cpu=0:00:00.1 mem=237.3M) ***
ERROR (SOCPARA-2056): Check error messages for power net VDD
*********************************
Please let me know where am I going wrong?
Thanks All!
Jitendra