Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to build a counter with JK bistabil's with module 5

Status
Not open for further replies.
C

cipi-cips

Member level 4
Joined
Jun 30, 2008
Messages
76
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
1,867
Counter

Hi!

Does anyone know how build a counter with JK bistabil's with module 5 (this mean it will count 1,2,3,4,5 than start again 1,2,3,4,5) I have seen a decade counter but cant find nothing so it can count up to 5
 

Counter

Hi
if your counter have reset and preset ,it is easy for you. add a logic in output to detect 6 .so apply this to make reset.define 1, in preset input to load 1 in reset signal.
 

Re: Counter

sry but I dont understand it well can you make it in Electronics Workbanch ?
 

Re: Counter

He is saying to preset the counter to 5, count down 5, 4, 3, 2, 1 reset to 5, 4, 3, 2, 1. ...

There are chips out there that do this. I recently did a counter with a MC100EP016A. Read that data sheet and you will see how it is done. There are other lower frequency chips out there too.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top