Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

W3100: an ASSP - hardwired TCP/IP chip with Ethernet Interface

Status
Not open for further replies.
F

FSio

Junior Member level 3
Joined
Nov 27, 2003
Messages
29
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,281
Activity points
255
A good alternative to connect via LAN to Internet are chips Stacks TCP/IP with MAc included

See
www.wiznet.com

/Deleted. (klug)/
 

Re: TCP/IP and Ethernet

Wrong link and the datasheets can be downloaded from the web, so don't put them here!

The link should be:

http://mechatronic.net/produkte/Halbleiter/WizNet.htm

Datasheets:

http://mechatronic.net/produkte/Halbleiter/WizNet/PDF/47WN001--i2Chip3100.pdf
http://mechatronic.net/produkte/Halbleiter/WizNet/PDF/W3100A Datasheet 1.1.pdf

Quote from site:

The W3100 is an ASSP (Application Specific Standard Product), the world's first hardwired TCP/IP chip with Ethernet Interface. It is designed for high speed applications because of its loopback speed of more than 3 Mbps.


Cheers,
FoxyRick.
 

Re: TCP/IP and Ethernet

hi
I read the roadmap of wiznet(www.iinchip.c0m) I saw the w3200,w3300,w3400,and they must released these chips at 2003 but that chips are not released yet!!!

why that company does not released these chips?
Is these comany reliable ?

Regards
 

Re: TCP/IP and Ethernet

I know what you mean about the roadmap, according to it the W3100 was available in 2001. There are certainly no signs of the later chips, even a google search can't find them.

Circuit Cellar have an article on it here:

**broken link removed**

The W3100 does look interesting and I may see if I can obtain some samples when time permits.

I note that some of the stockists listed for the part are listing them, along with the evaluation modules.

I'll report back if I get any samples.

Cheers,
FoxyRick
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top