Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking for Voltage Reference build using 1N825-6,2V zener

Status
Not open for further replies.

fjpompeo

Advanced Member level 1
Joined
Nov 29, 2003
Messages
415
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
Brazil
Activity points
3,042
ampop with reference input

Hi,

I need a "voltage reference" build using 1N825-6,2V zener(with 7,5mA current) and an Operational Amplifier LM358 (LM725 has an output current max of 5mA and LM385 is rated 25mA). Output voltage as close as possible to 12V. Inform formula and schematic for future modifications.
Input voltage min. 16V max. 26V.

P.S. As low as possible voltage drift with temperature variations better.

Regards,

Fernnado
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top