Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

To make a home alarm project by a PLC

Status
Not open for further replies.
P

pablome

Newbie level 6
Joined
Jun 25, 2007
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,350
Iv heard many trying to use a PLC to control an alarm for a house or any sort of place. I was wondering what components or good references there are(design, circuits etc. and if worth trying). I don't want to make it too complicated since the PLC will be either micrologix or SLC, maybe PLC500 or any suggestions?
 

Hello!

For this type of application you must define the parameters for alarms(when the alarm is running).

After that you must take into account what sensor do you need and wich are suitable for this type of alarms.You can use optical sensors,weighing sensors,capacitive sensors.

Some sensor manufacturers are :
www.sick.com
www.wenglor.com
www.vishay.com

and others ....

Based on this you can program your PLC to suit your application.

Best regards!
Venix
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top