Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to convert a nmos device to cmos device?

Status
Not open for further replies.
A

altra

Junior Member level 1
Joined
Sep 7, 2003
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
201
from nmos to cmos

Does anyone know how to convert a nmos device to cmos device.
Is there any question bring about?
 

Re: from nmos to cmos

By the way , how can I translate it into FPGA.?
 

NMOS process is not compatible to CMOS process. The logic cell design is different. Therefore, direct translation is not possible.

In order to convert to FPGA, you need the verilog or logic function netlist. But not the gate level netlist. The translation is very easy. You can read it from the manual of your FPGA synthesis tool
 

Re: from nmos to cmos

altra said:
Does anyone know how to convert a nmos device to cmos device.
Is there any question bring about?
Click to expand...
Nmos device and CMOS device is different implematation of a design. In the early day of MOS technolgy, people have problem in fabricate PMOS so most of the logic was implemnted by NMOS only. In term of circuit design there is a different of the design when you are design in NMOS or CMOS. Logic design are the same
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top