Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

TFT LCD Backlight voltage

Status
Not open for further replies.
I

ilikebbs

Advanced Member level 4
Joined
Nov 30, 2002
Messages
104
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,298
Activity points
705
lcd backlight voltage

I have a question about TFT LCD backlight voltage.

I have an inverter. Its kick-off voltage and working voltage is higher than the typical value of LCD.
Can i use it?

Generally i think that higher kick-off voltage is acceptable. I do not know if higher working voltage is acceptable.

Thanks in advance.
 

backlight voltage

could you use a capacitor to absorb some of the kick-off voltage? what about a resistor to bleed off some of the working voltage?
 

tft backlight voltage

Usually the voltage for the baclight is around 2000 Vac at high frequency.
So don't touch the wires unless you want an electrizing experience.

Mandi
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top