Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to use GSM module for sending MMS?

Status
Not open for further replies.
Y

yang317

Newbie level 1
Joined
Jul 30, 2008
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
Hi, has anyone tried using gsm module to send mms? My intent is to use a micro-controller to control the gsm module to send and receive mms to and from a mobile phone. Any recommendations for the gsm module to use? Thanks
 

gsm module with mms

You may ref. it.

Manufacturer MultiTech SocketModem
Type GSM/GPRS or CDMA


SocketModem GSM/GPRS

850/1900 or 900/1800MHz operation
Packet data up to 85.6kbps
Circuit-switched data up to 9600bps
GSM class 1 and class 2 group 3 fax
SMS capability
MMCX antenna connector and SIM socket
-30 to +70°C operation

SocketModem CDMA
800/1900MHz operation
Packet data up to 153.6kbps
Circuit-switched data up to 14,400bps
Class 2 group 3 fax
SMS capability
MMCX antenna connector and SIM socket
-30 to +70°C operation

Added after 12 minutes:

You may ref. the following weblink:

http://www.falcom.de/
http://www.cinterion.com/

Use AT command , Serial port , USB to control it.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top