Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

XNF (Xilinx Netlist Format) to EDIF conversion

Status
Not open for further replies.
C

cherukukeshav

Junior Member level 3
Joined
Jul 1, 2007
Messages
31
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,508
I want to convert XNF(Xilinx Netlist Format) files to EDIF format.
Can any one help me???
I am also looking for a tool which supports XC3142 FPGA synthesis and implementation.



Rds
Keshav
 

Look in your bin\nt folder under the folder that you installed the Xilinx tools. At that location, you should find a command line executable

ngc2edif.exe

This is what I used to use to generate the edif netlist that I used for simulation.
For building the XC3000 series of parts, I think you need the old tool set. Contact Xilinx, I think if you explain the situation they will allow you to download a copy of the old tools. Please be aware that this may be the old XACT tool chain and it is quite different from ISE.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top