Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

DS89C450 +( 74 LS 125 OR 74HC125 ) WHAT WILL WORK

Status
Not open for further replies.

sankalani2003

Banned
Joined
Oct 10, 2007
Messages
49
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Kandy,Sri Lanka
Activity points
0
in the data sheet give for ds89c450 microcontroller,they say use 74HC125 TRI-STATE buffer for switching.
im goint use 74LS125 instead of HC model.is it work.can any one say immediatly it.there is problem when finding HC numbers in here.
 

It will be ok to use the 74LS125
 

sankalani2003 said:
in the data sheet give for ds89c450 microcontroller,they say use 74HC125 TRI-STATE buffer for switching.
im goint use 74LS125 instead of HC model.is it work.can any one say immediatly it.there is problem when finding HC numbers in here.

it will work but you to be carefull for connections.
because it will change as per their internal diagram.
one more thing both the IC have different Power level so that should not forget..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top