Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Determination of reference plane in IE3D

Status
Not open for further replies.
M

mwband

Junior Member level 1
Joined
Oct 2, 2007
Messages
19
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Location
between the moon and new york city
Activity points
1,384
Hi All,

I'm facing a problem in determining a reference plane in IE3D. I want to compare the result shown in Fig. 2 of the following paper (IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, VOL. 51, NO. 10, pp. 2936-2946, OCTOBER 2003 by Prof. Samii). The method used in the paper is FDTD.

Thank you.

Rgds,
 

If I were you, I'd place the infinitesimal dipole at the origin as the paper indicated. Then, there should be no difficulty in calculating the energy-like integral over the reference plane as defined in the paper.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top