Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Can someone review the footprint in the picture pls :) ?
The picture from the datasheet (on the right), says "Bottom View" - would that mean that I have to mirror it before drawing the component footprint?
So Pin1 should be Pin6 instead (for instance)?.
(By the way the red is the...
I am building a audio interface for my microcontroller, PSoC5. Problem is audio is transmitted through mini jacks in the range -2V to +2V and my PSoC5's ADC can only measure 0-5V.
So I have to raise the -2 to +2V to my ADC range! further more I assume that some kind of AC coupling is...
I got this project, where i am using a microcontroller (PSoC5) which has both DAC's and ADC's build in. Theese are both 0V to 3.3V (the ADC can measure this interval and the DAC can generate it).
Now I have to do some regulation/digital filtering with the microcontroller, and for that...
I have to design a interfaceboard for my microcontroller (PSoC5 - 3.3V). The interface board should have +/- 10V in/out and a minimum bandwidth at 48kHz.
My plan for the output right now is to control mosfets with the microcontroller which opens and closes for the 10V.