Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. D

    PIC16F72 Bank Selection?

    NO NO here is the file of idx. actully it creating .hex file but also saying ensure bank. make -f nbproject/Makefile-default.mk SUBPROJECTS= .build-conf make[1]: Entering directory `D:/MPLABX/Projects/My COMSATS LCD.X' make -f nbproject/Makefile-default.mk...
  2. D

    PIC16F72 Bank Selection?

    but trisc and adcon1 is in bank 1 and portb in bank 0. the assembler mpasm is not giving any error and making .hex file. i am using
  3. D

    PIC16F72 Bank Selection?

    actually i know this. i want to demonstrait complere 16F72 instruction in .asm . so i decide to use portb equ xxx. but u r right. so thank u so much. ---------- Post added at 17:35 ---------- Previous post was at 17:08 ---------- What is the danger if i dont select banks? can iaccess register...
  4. D

    PIC16F72 Bank Selection?

    Is below is authentic coding? i dont want to use compiler instructions and dont want to select banks here and there so i directly use the address of register location? or i should need to use bank selection? org 0x00 clrf 0x9f ;all digital input output clrf 0x86 ;tricb...
  5. D

    PIC16F72 Bank Selection?

    hello friends. Please can you provide me code that how i can select bank0 , bank1, bank2, bank3 in pic16f72 using assembly language? i dont want to use banksel system plzz.
  6. D

    Question about microcontroller

    MOSFET works on volts not on current like transistors
  7. D

    Two questions from univeristy professor that i have answered tomorrow?

    Ohh! thats mean i couldn't understand the DMA article on wikipedia? and i write wrong in my blog. please read once the above html link . In clear words DMA or direct memory access is the technology of loading data into the ram from cd rom / dvd rom or hard disk or sending data to these...
  8. D

    Two questions from univeristy professor that i have answered tomorrow?

    i cant understand you mean DMA or direct memory access is a link between RAM and hard disk? But i think it is link between processor and memory devices like hard disk . And with the help of the DMA the processor can directly modify data on the hard disk with out involving ram?
  9. D

    Two questions from univeristy professor that i have answered tomorrow?

    I think the processor can directly read the data from the hard disk , modify the data and again write it to the hard directly with out the involving of the ram with the help of direct memory access? Am i right? ---------- Post added at 11:09 ---------- Previous post was at 11:08 ----------...
  10. D

    PIC16F72 8 and 19 Pin connected internally?

    thats meant i need to connected both pins to the ground but actual question now that why there is two pins in this 72?
  11. D

    PIC16F72 8 and 19 Pin connected internally?

    Hello! is PIC 16F72 pin No. 8 and 19 connected internally or i need to connect them both to negative? If they are connected internally can i use one of these pins as negative power supply for other devices or ic in circuit?
  12. D

    Disable print screen in EAGLE 5.11.0 while printing pcb with hp laser printer?

    oh sorry i meant silverscreen layer in eaglepcb
  13. D

    Disable print screen in EAGLE 5.11.0 while printing pcb with hp laser printer?

    How to Disable print screen in EAGLE 5.11.0 Light while printing pcb with hp laser printer?
  14. D

    Fixed volts ups kits by asif brothers lahore?

    is this kit available in lahore? Which kits you are preffer or u have made your own as you are doing electronics professionally on hall road
  15. D

    [SOLVED] MY LCD 2 x16 not working

    ;-) contrast is always create problem for beginners as i see
  16. D

    [SOLVED] MY LCD 2 x16 not working

    i have made the same error first time and my contrast connections were wrong. it is not possible that u adjust pot but lcd is blank with only led.
  17. D

    [SOLVED] MY LCD 2 x16 not working

    have u adjusted the contrast correctly may be display is there (if u configure ur lcd in ur programme correctly) but due to low contrast u r unable to see anything?
  18. D

    Two questions from univeristy professor that i have answered tomorrow?

    you mean it is possible to modify any data on the hard disk with out loading it in the ram directly? How?
  19. D

    Two questions from univeristy professor that i have answered tomorrow?

    can i modify a ms word file directly on the hard disk with out loading it in hard disk? If not than why?
  20. D

    Two questions from univeristy professor that i have answered tomorrow?

    Re: Three questions from univeristy professor that i have answered tomorrow? You mean the question of my question no. 3 is index.dat file? Can you plz tells me the exact location of this file in windows computer? I am still not able to get answer of my 2nd question why i cant modify a file...

Part and Inventory Search

Top