Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. H

    sigma delta adc problem

    i am working on a sigma delta adc second order three bit and i do the schematic design on cadence and i get 100 db and it is ok when i make the layout and make post layout it become 93db i found in the drawing of fft a pulse at another frequency 200hz(my input frequency is 100hz and band width...
  2. H

    amazing thing in sigma delta adc simulation in cadence

    when i simulate a sigma delta adc in cadence a time it is perfect another time it got bad and it is the same circuit does any one say to me why?????????????????????????????????????????????????????
  3. H

    very important in sigma delta

    i had been design a second order 3-bit sigma delta adc with osr=128 fs=50KHZ and band width of input frequency is 200hz and resolution is 14bit when i run the simulink design i got 99 db but when i run on cadence it become 60db i expect it is from the sampes i take from the cadence to matlab can...
  4. H

    very important in sigma delta using cadence

    when i want to calculate the SNR of output of sigma delta i run the design on cadence for 6 sec(as i have input=100hz &sampling frequency =50Khz) and i take it on matlab to calcsnr when i take samples very close from end the snr become 97db but when i go to the middle it become 60db so how many...
  5. H

    very important question in switched cap integrator

    first: i want to put a dc input on a switched capacitor integrator how can i do this second i make a sigma delta modulator and iwant to put the dac in the integrator and make the feed back bits to control the switches how can i do this please i want any one to replay to me
  6. H

    help in sigma delta modulator

    hi all i am working on a sigma delta modulator using .13um technology and i want an output from the DAC ranging from .225 to 1.575 and my Vdd=1.8 so i can't do that as my common mode input is .9 how can i do this big swing DAC

Part and Inventory Search

Top