Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. R

    Operating frequency of DLL

    Hi! How to determine the operating frequency range of DLL? Based from the equation below, Max [(2/3)*DVCDL(max),DVCDL(min)] < TREF_CLK < Min [2*DVCDL(min),DVCDL(max)] am I correct that its operating frequency depends on the minimum and maximum delay of the VCDL? How to determine the maximum...
  2. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    I will recheck my circuit and apply what I learned in this thread. If my circuit is the problem at least now I have the idea on plotting the curve. Thank you for all the help. :smile: Salamat!
  3. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    This netlist was the version before I inserted #41. I also shrink range of delta_phase_deg as what you had stated. .option PARHIER = LOCAL .option POST .temp 25 .GLOBAL gnd! vdd! .param fund_period=2n .param delta_phase_deg=0.0 .param tdelay='(delta_phase_deg/360)*fund_period' xi12 vdd...
  4. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    I found the pfdcpGain.sp at the different directory. Yes, the lines exist at the .sp that I run. I attached i1(vload):0 plots of the .snf0 and .sn0.
  5. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    I've been using the .tran analysis in checking my PFD+CP since before. And from the papers I've got, only the output from the .tran was shown that is why I wanted to try showing the plots (such as in the beginning of this thread) to check my PFD. - - - Updated - - - Netlist in #41: .option...
  6. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    Netlist: .option PARHIER = LOCAL .option POST .temp 25 .GLOBAL gnd! vdd! .param fund_period=2n .param delta_phase_deg=0.0 .param tdelay='(delta_phase_deg/360)*fund_period' xi12 vdd! down up out_clk ref_clk start pfdv2_sch v17 start gnd! dc=0 pulse ( 0 1.8 500p 1p 0 0.5 1) v16 out_clk gnd...
  7. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    I'm sorry. I tried searching the file, and either I am not allowed to access it or it actually doesn't exist in my directories.
  8. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    Hello! Here are the plots for the netlist edited using #41 - - - Updated - - - The plot you ask in #40.
  9. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    I inserted the lines in #38... Here is the plot for ir1(c18):(0) and ir1(c7):(0) of .snf0
  10. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    .option PARHIER = LOCAL .option POST .temp 25 .GLOBAL gnd! vdd! .param fund_period=2n .param delta_phase_deg=0.0 .param tdelay='(delta_phase_deg/360)*fund_period' xi12 vdd! down up out_clk ref_clk start pfdv2_sch v17 start gnd! dc=0 pulse ( 0 1.8 500p 1p 0 0.5 1) v16 out_clk gnd! dc=0...
  11. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    Yeah its pretty old, and its the only version our school provides.
  12. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    I'm not sure if I did it right. - - - Updated - - - Plots for In, Ip and Ipump.
  13. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    But can't see any i(c18) and i(c7). I already inserted the .probe i(c18) i(c7) as what you advised. .option PARHIER = LOCAL .option POST .temp 25 .GLOBAL gnd! vdd! .param fund_period=2n .param delta_phase_deg=0.0 .param tdelay='(delta_phase_deg/360)*fund_period' xi12 vdd! down up out_clk...
  14. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    I also tried putting this into the netlist and got a .snf0 file
  15. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    .option POST .temp 25 .GLOBAL gnd! vdd! .param fund_period=2n .param delta_phase_deg=0.0 .param tdelay='(delta_phase_deg/360)*fund_period' xi12 vdd! down up out_clk ref_clk start pfdv2_sch v17 start gnd! dc=0 pulse ( 0 1.8 500p 1p 0 0.5 1) v16 out_clk gnd! dc=0 pulse(0 1.8...
  16. R

    Plotting characteristics curve of Phase-frequency detector (PFD)

    I did what you said, then the only difference with the previous simulation is there is a .sn0 now

Part and Inventory Search

Top