Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. P

    Control the RPM of a driller.

    Hi I want to control the RPM of my electric driller. The range is 40 to 3000 RPM, 220 volts, AC. What is the best circuit to this? Thanks in advance. P.D. sorry for my bad english.
  2. P

    Laser for cut Balsa wood

    Hi I read is possible cut Balsa Wood with Laser, somebody have details for this. Thanks in advance. bye
  3. P

    16F628 internal oscillator with pic basic???

    16f628 en basic You need to configure more things: @ DEVICE pic16f628, WDT_ON or @ DEVICE pic16f628, WDT_OFF @ DEVICE pic16f628, PWRT_ON or @ DEVICE pic16f628, PWRT_OFF @ DEVICE pic16f628, BOD_ON or @ DEVICE pic16f628, BOD_OFF @ DEVICE...
  4. P

    Programmers for EEPROMs or PICs

    jdm programmer transistors Unfortunatly no, my english is not very well for make a English version. But the diagram is very clear **broken link removed** **broken link removed** Only with the diagram you cam build it. I made the 4 programmers and all works fine. If you don't find a english...
  5. P

    Programmers for EEPROMs or PICs

    jdm programmer by feng I recommended the PP2, use the parallel port of the PC or notebook, need external source but programs a lot of PIC's and Eproms, and if you build the adapters can program another micros. **broken link removed** Sorry but the pages are in spanish, if not understand i can...
  6. P

    Programmers for EEPROMs or PICs

    how to build jdm programmer Its differents things. JDM Programmer is the hardware, is a simple programmer, only need a few components (resistors, capacitors, diodes and transistor), very good for the beginners, use serial port, normally works fine in desktop computers but have some problems in...
  7. P

    Looking for schematics of PIC USB Programmers

    winpic800 3.55g What version of winpin800 are you using?
  8. P

    willman microcontroller programer kit

    gtp programmer Wakaka: The ICSP don't need power from the Pic circuit, don't connect power from the GTP USB to power from the Pic circuit, only connect the ground of both circuits and Vpp, Data and Clock. The GTP USB have to groups of connectors: Vpp, Vss, Data and Clock for the ICSP. Vpp...
  9. P

    Microwave Office 2004

    Hi: Somebody have Microwave Office 2004 demo to donwload please. Thanks in advance. Bye
  10. P

    We are all from China

    Re: From China Not in Shenzhen, this is in Jiang Nin District. But maybe help you. Bye
  11. P

    Looking for diagrams of 433.92 MHz RF modules

    Re: RF Modules Are you kidding Straw? My Location is PERU !!!!
  12. P

    Measuring Oscilloscope Probe Capacitance

    measure capacitor through oscilloscope Hi Where i put the AC capacitor in this diagram and how it to affects the value of capacitance probe's? Thanks
  13. P

    My Programer Doesn't Burn The PIC16F84A + Help

    What proggrammer do you have? JDM, PROPIC2, TE20 How is your voltaje in Vpp? Give us more detail, is very difficult help you without this.
  14. P

    willman microcontroller programer kit

    gtp usb pic Ful Babu: I make a mistake and apologize for it, but i only try to help you. Sispic is still alive. Any way, if you don't have good ways i can't help you. Bye
  15. P

    willman microcontroller programer kit

    gtp-usb programer Hello Fat Babu: GTP USB PLUS is not free, you need to contact with Francisco (Sispic) winpic800@hotmail.com Have various opcion to buy, only the pic programmed, pcb, or programmer ready to use. You need the software Winpic800, but its free. If you have more cuetions maybe...
  16. P

    pic16f84A JDM programmer

    jdm for pic16f84a My english is bad but y try to explain it. If you don´t have care, you can only program one time the pic with JDM. If you define outputs RB6 and RB7, when you try to program again, Ic-prog first give power to Vcc, inmediatly the program in the pic define outputs RB6 and RB7...
  17. P

    Looking USB PIC programmer with 2 I/O port and LCD

    pic800 programmer I speak spanish, maybe i help you. You necesary use Winpic 3.55 for work with the GTP - USB, this free version is called SUMMER. The hex come with this version of Winpic. The news version of Winpic not come with the hex. Sisco built a new version called GTP - USB PLUS, is...
  18. P

    Looking for a good substitution webpage.

    Hi "Paisano": When i go to the electronic stores in Lima ("Paruro"), they ask me for ECG part and introduce in the computer and offer me equivalents for the ECG part. But they don't give me the codes, only the prices. :| I wanna have this software. Bye
  19. P

    Optrex graphic lcd - DMF50375

    optrex e91964 Hi I have a optrex graphic lcd, with this numbers: DMF50375N POO-371112-A2 E91964 3134L OPTREX MADE IN JAPAN **broken link removed** I have looked for in optrex web and internet, but only found is an 120x60 graphic lcd. :| Thanks for any information on the matter Best Regards.

Part and Inventory Search

Top