Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. S

    Flash programming, strange issue

    no, they are as per datasheet. I solved: i was writing right, but the ide was reading the same value in other memory location also. Was 2 pins of the flash not well soldered :) many thanks,
  2. S

    Flash programming, strange issue

    Hello all, i am experiencing a strange problem programming a parallel flash memory SST29VF3201B (2Mega x 16bit words) from a coldfire processor. i try to explain what happen 1) using the constructor programming algorithm, i erase the flash, this succeded, i have all the 16bit words to 0xFFFF...
  3. S

    hw design error, looking for a workaround

    Hello all, i have developed a little custom board, with a MCF5307, a 16x2MB (word programmable) parallel flash (SST39VF3201B), a 16MegB. SDRAM and some other peripheral. Anyway, since this is one of my first quite big embedded circuit development, i connected for error the flash memory address...
  4. S

    Problem with AT+CPIN command for Sim300

    cms error 517 ds18s20, i was looking for an answer, not a for a question :) The board is not mine, and i will never buy a dev board couse i can do it starting from the module. Anyway, since i have seen in the forum this and other unanswered questions, i want leave some answers, hope they would...
  5. S

    Problem with AT+CPIN command for Sim300

    Hello all, i get a sim300_dev board, and i would be able to send some sms. After startup i get: RDY +CPIN: NOT INSERTED +CFUN: 1 I trying to put a pin, with AT+CPIN i get +CME ERROR: 10 if some help, thanks

Part and Inventory Search

Top