Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I tried to drive this device from the datasheet, but I have some problem...
In no decode mode, it is working until I tried to set 4 segment on any digit! After I tried to set the 5th digit, all start to blink...
The Vcc current is about 800mA, so it should be enought!
I tried to write a simple program, which is use the serial port, and send something to the computer, but it doesn't work! I got some error message after the compile! The code should be good, because if I choose an another chip in the Options/Compiler/Misc, the code can be compiled...
Till now, I used 90s2313, and now I want to use attiny2313.
The base problem is: how I can programme the new chip?
I used Fun-card programmer, with IC-Prog 1.05D to programming the 90s2313 chip, and I'd like to know, can I use it with the tinny2313?
Thank for your answer...
I'd like to make an IR data logger with 90s2313 in basic language if it possible!
The idea: measure the ir signal's length, measure the break's length between two signal, store it into a buffer, and send it to the computer throw the RS232 port! After it, a program recieve the data, and...
I want to drive my Nokia 3310's LCD with 90s2313 uC! I now the algoritm to drivve it, but I don't now, how can I link the LCD, wich has 3,3V VCC, to the uC, wich has 5V VCC? Sorry about my pour english!
Anyone can help me?