Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. S

    24V dc to 20Kv Dc conversion...need help

    Hey Thanks....!!!!! for the info...!!! Regards Sadashiv
  2. S

    24V dc to 20Kv Dc conversion...need help

    Hi There...guys... hope you all are doing good and fine...!!! I need some help on High voltage conversion... 1 --> Input voltage 24V dc -- Output Voltage 20Kv dc with 20uA current 2 --> Input Voltage 230V ac -- Output voltage 20Kv dc with 20uA current How to go with this...??? I have...
  3. S

    tcpi/ip in microcontroller

    Try the link below....!!! https://www.asix.com.tw/ Regards Sadashiv
  4. S

    Atmel AVR application archive

    avr450_charger Hi Gevv Thanks do you have power supply projects like this if you have then plaese share. Thanks in advance Sadashiv
  5. S

    I2C Communication Between two Micorcontrollers

    iic half-duplex communication Hello Freinds... is it possible to do I2C Between Two Microcontrollers??? If yes How To do this....?? this was one of the interview question i am not able to answer. :-( Thanks Sadashiv
  6. S

    ULINK2 Schematic ans printed board

    ulink schematic Hi ZPC.... did u made ULINK...for ARM..... if yes.....would you share with us...!!!! i been top your site....but couldent understand anything....!!! Thanks in advance.... Sadashiv
  7. S

    CoolRunner-II CPLD i/p voltage tolerence?

    Hi sachingorkhe... For this CPLD XC2C64A There are two supply ...called VCCIO1 And VCCIO2.... you can connect this to 3.3V....please see your datasheet carefully..... there are two banks .....Bank1 and Bank2 for this CPLD....... you have to connect VCCIO1 and VCCIO2 to thses banks..... see...
  8. S

    Problem with using PIC18F252 for driving a relay output

    Re: PIC output - Relay Thansk for your reply.....!!! Regards Sadashiv
  9. S

    Problem with using PIC18F252 for driving a relay output

    Re: PIC output - Relay Hi "ric_vas" Have you tried the RC filter Combination on the pin..... let us know....
  10. S

    Jeremy Banthams TCP/IP Lean Code

    Hi... Here is a chipweb folder that contains the code you need.... Regards Sadashiv....
  11. S

    Protel DXP 2004 Fill Pad option...

    Thanks for your valuable response.... I have tried this ...... what u have given is for printing.....and i dont have a laser printer.... still i have a question....that how to make gerber ....which has this option... i mean the option of fill pad.... generally for single sided pcb i make them...
  12. S

    Protel DXP 2004 Fill Pad option...

    I dint get you.... what exactly you want to say.... Regards Sadashiv
  13. S

    Protel DXP 2004 Fill Pad option...

    HI... Is there any option availble in Protel DXP for the PAD FILL OPtion.. i mean there is a option available in Eagle called fill Pad....with this it is really easy to drill in a systematic way....when we Fabricate PCBs at home...
  14. S

    How to interface a dotmatrix printer to 89c51?

    Re: printer interface Hi ... Regards Sadashiv
  15. S

    Freescale Open source Debugger (BDM)

    freescale bdm Its in "Freescale Debugger.rar" attachment..... Regards Sadashiv
  16. S

    Freescale Open source Debugger (BDM)

    open source bdm Hi This is a Freescale Debugger "OSBDM08". I have made the circuit in DXP2004. may be helpful for someone.... Thanks & Regards Sadashiv
  17. S

    Regarding TCP IP Lean book

    Hi, I have the softcopy of the E book TCP IP Lean from our forum. In this book he had written that, there is a CD which comes with this book, In that CD he had some codes for TCP IP and also for PICDEMO.net......... I dont have that CD.... does anybody have that CD....or its content...
  18. S

    How to Define a Irregular board shape in Protel

    Hi this is very simple.... you select all the outlines using shift key.... (I mean All out lines) what ever shape you want.... Then go to Design --> Board Shape --> Define From Selected Object And done...you will get the shape you want.... Hope this hepls... Thanks & Regards Sadashiv
  19. S

    Protel DXP 2004 - CTRL + Left Click in PCB Editor Not work

    Re: Protel DXP 2004 - CTRL + Left Click in PCB Editor Not w Hi... Have you checked your mask level.... might be that is a problem... just chekc that ....the highlight function may be working but because of the mask level it does not comes in a picture..... I have attached the image for your...
  20. S

    Altium DXP GND plane problem

    Hi... when you actually put ground plane...you must choose place copper region... then a window opens up...in that there will be a window connect to ....in this window....choose the net Vss if you want to connect to Gnd hope this helps you... Regards Sadashiv

Part and Inventory Search

Top