Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I want to interface
Anemometer (wind speed and direction measurement)
Pollution Level Sensor
with mcrocontroller (any)
Any body have an idea which equipment is best to interface with the microcontroller. Do not need home made or hobby circuit...
Here is my detail requirement of my project
PIC will require I²C to read a CMPS03 compass module
My Preference is for 10 pins providing 10 bit parallel output representing integer data received from the compass module.
The 10 pin connections will directly connect to a VIOM module.
I am using PIC 16F877 now i want to transfer my data which is present in SSPBUF to the prot in Parallel way of 10bit in such a way that 8bit is full consumed from port 2 and take 2bit (two pins) from port three how is it possible
Am i using MAsking or other technique ? plz help me if masking How ?
I want to transfer data in 10bit parallel to other device how can i implement it ?
Data must be transferred using "port 2" and two bits from port 3 how is it possible ?
I am using pic 16f877
plz help me
I m transferring data from PIC16f877 to PC by using bluetooth or infrared
Any one can tell me which bluetooth device is better for PIC i mean
it model number not costly one and easily available
I use Infrared Device if i use infrared
which is compatible for PIC16f877 so that to transfer...
There a problem came with me by using PIC16F877
My two controllers are out of orders by programming it through proper professional programmer
i think programming 16f84 is easy but a problem came in 16f877
I am currently a final semester student
I have recently purchase a WIZ-C compiler student from fored.co.uk
after writing a huge code i burned PIC16F877 and want to check my circuit but it did not work.
After erasing the microcontroller i write a program which just blink led in PortB at pin...
yes, PIC16F877 has a floating point math i know because
in my final project i am using this microcontroller but using a compiler of
WIZ-C which provide the fascility of
floating point math
u can check the software at
I m a student of BCE(computer engg.) final semester i have a problem plz tell me how to read data from program memory of specific location
as by sending reading bit command
then it will come to my parallel port how i read it serially bit by bit and then convert it to hexfile
as i am doing...