Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. 1

    Validation of simulation with fabricated results by testing with Agilent's VNA

    I have completed design of my LNA at 2.1 and 4.6GHz. Thanks to edaboard members for your help. Now I am checking port parameter(s11, s21, s22) with help of Agilent's VNA. But i am not getting notches at desired frequencies. s11 is better at 1.6GHz and s22 is better at 1.2 and 1.6GHz. I have...
  2. 1

    Microstrip antenna design for GSM band

    Hi to everyone. This is my first post on this group. Can anyone clear the following doubts. I am designing MSA for GSM 900/1800. I want to know, how we can calculate feed line dimesion. .... And simulation result shows negative gain, what it indicates? How to increase surface current on...
  3. 1

    Design of bias circuit for LNA.

    thank you bigboss , i have got results by designing matching network using distributive element and without any bias circuit..... ..... can u tell me, how a matching network is designed to terminate the harmonics specially 3rd for LNA? Thanks and Regardd
  4. 1

    Design of bias circuit for LNA.

    Actually i have used s2p file for 2V and 5mA. As u suggest, without matching network i got the results with 2.9dB gain. And the gain provided at 50ohm termination is above 12dB. ... I want to know What is problem when matching network is attached? & Thank u.
  5. 1

    Design of bias circuit for LNA.

    I have designed LNA at 2.4GHz with Input and Output matching networks. I am not getting proper gain, vswr and NF ALSO due to some silly mistakes. Point out the mistakes... Thanks and Regards
  6. 1

    Design of bias circuit for LNA.

    I am designing LNA at 2.4GHz using ATF541432a. I have designed matching circuitary on input and output side. Now i am left with Bias Circuit design. How can i calculate values of L(for RF block) and C(to block DC)? And if i do voltage divider circuitary then will it affect noise performance of...
  7. 1

    Design of low noise amplifier.

    i am designing a lna using Avago's transistors using Microwave office AWR. Doing a simulation using s2p file. i hav 4 file with different Id and Vd values and using one of them at Vd=3v and Id=40mA. but not getting proper I-V curve. ........Please anybody help me out that..

Part and Inventory Search

Top