Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. M

    problem in AT command with smtp

    any suggestions??
  2. M

    problem in AT command with smtp

    i use arduino with gprs (sim900) just; i want to know how do i get the file(test.txt) and placed into instruction (AT+SMTPFILE=1,"test.txt",0) the file is exist on sd card connected to arduino
  3. M

    problem in AT command with smtp

    SA i can send email from sim900, but i can't send attached mail because i dont know how the path of the file is placed into the instruction "AT+SMTPFILE=1,"test.txt",0" So, where the AT command gets the path or text file ?? the instructions that i used are AT+SAPBR=4,1...
  4. M

    [SOLVED] problem in sim900 and AT command

    thank you for all the problem is solved the problem was closing gprs with AT command before sending the mail. finallyyyyy, email sent
  5. M

    [SOLVED] problem in sim900 and AT command

    i have read this manual but still cant send mail every thing is ok except AT+SMTPSEND it gives error - - - Updated - - - AT+EMAILCID=1 ok AT+EMAILTO=30 ok AT+SMTPSRV="mail.xxxx.com",26 ok AT+SMTPAUTH=1,"m@xxxxx.com","12345" AT+SMTPFROM="m@xxxx.com","m" ok AT+SMTPSUB="REPORTE_GPRS" ok...
  6. M

    [SOLVED] problem in sim900 and AT command

    HI I've Connected the SIM900 to arduino uno and I'm Sending & Receiving codes I want to send Email from sim900 to one of my E-mail accounts. In the last step of sending E-mail , after sending the code "AT+SMTPAUTH=1,"xxxxxxxx@xxxxx.com","xxxxxxxx" it gives me error so, how do i fix this...
  7. M

    Data Logger with Microcontroller 18f452 or 16f877A

    HI...this is very urgent!!! I have a microcontroller 18f452 Interfaced to SD card. I use 1Gb sd card. The desired connection is : sending .txt file from microcontroller to an email through wireless or whatever but without wiring, Can anybody help MEEE!!!!!
  8. M

    Building Datalogger and sending data to an e-mail

    Thank you horace1 i will do
  9. M

    Building Datalogger and sending data to an e-mail

    So, how can i connect microcontroller with modem to transfer .txt file from SD-card of microcontroller to an email. if there is useful links
  10. M

    Building Datalogger and sending data to an e-mail

    So, if i want to develop with raspberry what i have to know linux, c .. ? and from what should i start?
  11. M

    Building Datalogger and sending data to an e-mail

    but Raspberry is more expensive than traditional microcontroller in your system how to transfer .txt file to email
  12. M

    Building Datalogger and sending data to an e-mail

    Hello all I want to build a data-logger to measure 1- volt 2- frequency I can make the software that can measure the previous parameters but if i suppose to the data-logger will collect the readings in excel file or some file looks like excel along the day and send this file at the end of...
  13. M

    How to measure AC amplitude

    I have done the complete project thanks for all, the project is working well
  14. M

    convert frequency counter to Rf frequency counter

    yes the output power is around 300 milli watt so, any logic gates are needed to measure this signal
  15. M

    convert frequency counter to Rf frequency counter

    Hi I have done 50 MHZ frequency counter by pic 16f877A . i have radio frequency (33MHZ) signal in transmitter that contains antenna . My question is :is there any interface between the antenna and my frequency counter to measure this rf signal ??
  16. M

    [SOLVED] maximum frequency in pic 16 & 18

    hi all i want to know the maximum frequency at pin T0CK1 in 16f877a & 18f452 to know if i used these pics as a frequency counter will count to what Hertz ? i try the datasheet but i cant extract these information ...
  17. M

    High Frequency counter

    thank u betwixt any suggests about changing pic or another method to measure in precise ?
  18. M

    High Frequency counter

    Hi I have done 50 MHZ frequency counter by pic 16f877A and 20MHZ crystal. My question : can i convert it to 200 MHZ by divide the input frequency to a certin value ?? If yes , any another steps are required ? thank u in advance
  19. M

    [Moved] limit switch in protues ?

    is limit switch exist in protues ? how do i bring it ?

Part and Inventory Search

Top