Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
since you have already built the circuit, you can try to put the R4, R7, D2, C5 and you will see the differences. It should be get some different results possibly better. Try it and let us know about your positive or negative results
you can have a look on my attachment regarding Rayleigh Fading Channels in Mobile Digital Communication Systems Part I: Characterization. Also try to find his book as well. The book has title: B. Sklar , Digital Communications: Fundamentals and Applications, Englewood Cliffs...
I'm attaching a pdf document for Rayleigh Fading Channels in Mobile Digital Communication Systems Part I: Characterization. I hope that will help you a lot in theMobile
Digital Communication Systems
I'm sorry for my late response but due to site maintenance I'm sending you now my reply. My email address is email@example.com. I'm looking forward to hearing from you soon
rf power amplifier desig
I have the following specification for an RF power amplifer:
800MHz - 1GHz
+27 to +30 dBm
P 1dB compression point
DC input=3 Watts
Two stage amplifier
using BFG235 or CLY5(GaAs FET)
Does anyone know how to...
ansoft helical antenna
I’m interested to learn quite well the Ansoft Designer and Ansoft HFSS. My problem is that I cannot find any tutorials step-by-step so I can learn both of the brilliant software tools very-very good. Another problem which I have got is that my company does not...
collection electronic schematic component
To tell you the truth, if you are in the UK, there is a store called Maplin. Maplin sale a GCSE component kit for the students for college or university and provides with the components and the quantities which I stated above. The problem is that is not...
gcse component pack
Thank you very much for the link it is very useful. The problem is that I have one veroboard and I was hoping to find a project to fit all the components which I have into the veroboard.
gcse component kit circuits
I have bought a GCSE component pack. It is an assortment of electronic components housed in a quality storage box intended for students following the GCSE courses in Electronics. The pack includes a wide selection of capacitors, resistors, transistors...
I have design my MSc thesis initially in ansoft designer and was extremely difficult to design a 3D design into a 2D program and became crap. Ansoft Designer is a 2D program and Ansoft HFSS is a 3D one. In fact in HFSS you can design and 2D. As now for a project I'm suggesting you to take...
radiation boundary in pifas
I think that i can help you with you issue. My MSc thesis was all about that. Please read the following which is part of my thesis:
Airbox Dimensions and boundary conditions
In order to accurately simulate the behaviour of...
hfss helical antenna
I'm designing in HFSS, a small helical antenna with 3 turns and with a small microstrip feed line and it will be connected outside of the ground plane. The ground plane will have dimensions of 20*30mm, 40*30mm, 60*30mm, 80*30mm and 100*30mm respectively. Anyone can...
I'm looking a project title for my MSc in the antenna design and engineering, microwave and electromagntism using also HFSS or Ansoft Designer. I need some help for a good topic. Thank you very much for your time.
Added after 1 minutes:
Please send me any...