Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
i use spartan 6 xcls4 - on my board SUSPEND is floating while i use serial slave configuration, in ise help i found that i can PULLDOWN this pin but this optiona ctually isn't found on the toool itself, what is the effec of this pin and how can i overcome this issue
on my grad project i stopped at following
Have the following
Rates of Dynamic System (something moving on air) Vs time of this sampled rates
How to define Transfer function of it by MATLAB, considering it is 2nd order or 3rd order + delays considerations :)
- - - Updated - - -
and how to...
I am implementing a control system in VHDL. Now I am facing a couple of problems. For the controller itself, I used two inputs - error and change of error. Now I have to pass the controller output to a plant which has the transfer function of 1/(ks^2+s), where k is a real number.
I don't know...
something i couldn't imagine how to do
simply, i can use vhdl with fpgas but i dun know how to use that in this mini project
readings from analog signal comes from a detector have to read it on PC
how to do that with simple sparton 3e kit !! and how to do it with a board that owns its DAC...