Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
There are simple manual how to create Protel Project:
1. Create New Pcb Project
2. Add to project Schematic Document
3. Add to project Pcb Document
4. Draw you schematic
5. Go to pull down menu Design and select Update Pcb Document.
6. Now Netlist automaticly imported in Pcb Documet
Latitude E4300 Touchpad Problem
Hi got one Dell Latitude E4300 with touchpad not working. On keyboard connector pin 6 was shorten and burn out all pad. On open circuit there is 5V, but with keyboard connected drops down to 1.5v. I think this pin is power supply for backlight for kbd and for...
I tried to run willem programmer thru USB to LPT but not worked. Willem requires direct access to LPT for example LPT1: I/O port 0x378, USB emulation don't use I/O Port, only exist Label LPT1.