Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. D

    Plotting Group Delay in HFFS Circuit Design

    I am trying to plot the group delay of my simulation. I have attached my plotting options that appears in HFSS to this post. I cannot seem to find group delay in these options.
  2. D

    HFFS Schematic editor to layout

    I am trying to build various power dividers, couplers and array antennas in HFFS. Even though I construct the circuit properly and get good simulation results my layout comes out very messy.I have tried ctrl A + ctrl M + ctrl D but that does not make a difference. I have attached my circuit and...
  3. D

    Transferring CST file to CAM350

    I am trying to manufacture the antennas I designed in CST. I need to transfer them to CAM350. I do not know how to use this program. Can someone assist me?
  4. D

    CST component library

    I am working on designing a coupled line bandpass filter and I need a coupled line component just like the one attached to this post. However, I cannot seem to find this exact component in CST. Does anyone know the name of the component?
  5. D

    Why does my optimization run in HFFS?

    I am trying to construct a 4 element array antenna. My design goals; S11<-15dB and S21=S31=S41=S51<=-6dB has not been met. Hence I setup my parameters, defined my goals and tried to optimize my circuit. Even though it says "Optimization Analysis Done" I still get a blank page for my S-parameters...
  6. D

    Distance (mm) between two coupled lines

    I am trying to design a coupled line coupler at 2GHz in CST and want to know what the distance between my two coupled lines are. The design frequency is 2GHz and the coupling coefficient is 35.36. How can I find the distance between the lines?
  7. D

    HFSS Circuit Design Component Library

    I am trying to design the circuit of a coupled line coupler in HFSS. I need a component which is a microstrip coupled line such as the component named "MCLIN" in ADS. Is there such a component in HFSS?
  8. D

    Plotting Power at Output ports in HFSS

    I am trying to build a quadrature hybrid coupler with arbitrary power division which is a 4 port network. I need to see the power at the 2 output ports to realize my design. How can I plot power in HFSS just like we plot the S parameters?
  9. D

    Setting Up Optimization in HFSS Circuit Designer

    I am designing a 4 way wilkinson power divider to feed my antenna. The design frequency is 10GHz but without optimization or tuning, the S11, S21, S31, S41, S51 shift in frequency and I cannot get the desired results for 10GHz. That is why I set up an optimization to shift back the frequency to...
  10. D

    Optimizing Feed Network of an antenna for S11 and Farfield Gain using CST

    I am trying to create an Hybrid Metasurface Antenna Array. My S11 and farfield pattern did not come out as desired. I know this problem is due to my feed network not being precisely correct. My feed system consists of 3 wilkinson power dividers that are not symmetrical. Predicting the phase...
  11. D

    1:4 Wilkonson Power Divider using CST

    I am trying to replicate the 1:4 wilkonson power divider attached to this post. Not enough information is given regarding the dimensions, that is why I could not design it. How can I design the exact same circuit without knowing the dimension? I am going to use the design as a feed network for a...

Part and Inventory Search