Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. E

    Shematic to PCB help.

    Hello, I have designed a small circuit using Proteus and the simulation works fine. I built the circuit on breadboard and worked great, was chuffed. I've decided I want to make a better PCB and not use breadboard, ive used design spark to layout my PCB and had a few made but there is always...
  2. E

    [SOLVED] 555 Timer Monostable 5V to 3V !!!!!!!!!!

    Thanks for the reply's. I have used a TLC555IP works perfect :-).
  3. E

    [SOLVED] 555 Timer Monostable 5V to 3V !!!!!!!!!!

    Sorry, I think I just found the problem. The minimum voltage is 4.5V so NO.
  4. E

    [SOLVED] 555 Timer Monostable 5V to 3V !!!!!!!!!!

    555 Timer Monostable 5V to 3V ! Hello All. I have made a Monostable 555 circuit that runs on 5V and works fine, lights up my laser. I need to run the circuit from a 3V battery CR2032, when I use 3V the laser doesn't light up. Should I use a transistor? Is the 555 timer not cable of...
  5. E

    Small Bluetooth module for wrist

    Hello, I'm looking for a 5-10 metre Bluetooth range device. The device has too be small enough to be used with a wristband like a Fit Watch ect ect. Looking at connecting to both ISO/Android type of App. I'm looking to connect an output from the device to a vibrating mechanism. I'm a novice...
  6. E

    Small bluetooth Chip

    Hi all, I'm looking for a small Bluetooth chip with a logic out or a signal out, so if a signal is received or not received the output turns on a small vibrating device. Is there a Bluetooth chip out there :-S, I've looked but I'm struggling a little, cheers. Needs to be small about 10mm/20mm
  7. E

    Opto Switch Reversing

    This was my thinking too as I was only getting 7.54ma from the output enough to power and LED but not enough to power the motor. I tried a BC108 trans but that didn't work, I do have a much more powerful transistor to try. I don't understand why it shorts out though. I just put the output of...
  8. E

    Opto Switch Reversing

    I have got a Opto switch, which I want to turn a motor off and on. So when the switch is active the motor is on. When the switch is deactive the motor is off. I have this Opto switch **broken link removed** The switch keeps shorting out when I connect the output to my motor, one end of the...
  9. E

    Opto Switch Reversing

    Cheers, That's what I'm trying to do, just using it as a slotted switch
  10. E

    Opto Switch Reversing

    Thanks I did realise this yesterday, I was shorting out across the board. Now I have it setting across the board but still not joy. I think I need to work out the correct resistors, I've used 3k and 330 ohms like someone said but when I go direct to the output of the resistor I get no current out
  11. E

    Opto Switch Reversing

    I just cant to seem to get this to work :-(
  12. E

    Opto Switch Reversing

    Cheers Brad, ill give it a try :-) - - - Updated - - - Ive tried but still no output
  13. E

    Opto Switch Reversing

    Need some help, wiring up my OPTO cant seem to get it to work. I'm using 5v? Ive got this switch https://eu.mouser.com/ProductDetail/Optek-TT-Electronics/OPB620/?qs=MYMjFsmMg9YcB0fPJ0vWRQ%3D%3D
  14. E

    Opto Switch Reversing

    I'll just use a NOT IC then
  15. E

    Opto Switch Reversing

    Hi folks, Can you reverse a opto switch?, So when the switch is broken it turns a light on and when the switch is unbroken it stays off? :-s
  16. E

    3 way latching swich

    Can you get a small 6 pole relay?, been looking cant fine one
  17. E

    3 way latching swich

    Ive figured it all out :-) but only with help from you guys :-). Works as I want it too but now breadboard time!!!. Wish me luck haha
  18. E

    3 way latching swich

    I cant get the motor to turn backwards when the first switch is in the second position - - - Updated - - - Is the coil the BOX on your schematic of a thousand words
  19. E

    3 way latching swich

    I know what you mean, if you don't mind, then ill know if we mean the same thing :-)
  20. E

    3 way latching swich

    Yeah I could do it that way. :grin:

Part and Inventory Search

Top