Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. H

    Advice how to get help to convert it to all to ASM?

    Keith sorry for not getting back sooner I have been doing more research and looking @ different option what to try next to answer you question I'm not sure I'm running a 4mz and the "C" code does not list it
  2. H

    Advice how to get help to convert it to all to ASM?

    thanks again ok I had a few hours to work on this afternoon I tried to check everything posted here as well as make those changes I'm still not sure if I have this part right ;????????????????????????????????????????????????????????????????? ;;;;;;;;"c";;;;;;;;;;;;;special_word = 0x0f; movlw...
  3. H

    Advice how to get help to convert it to all to ASM?

    sorry had out of town family come to town will get back on this tomorrow reading over all that is posted thank and please stay with me on this
  4. H

    Advice how to get help to convert it to all to ASM?

    Thank you both for being so kind to help me. No I do not with out it I did not think I could compile in "C" you both have given me some good ideals that I will work on I should have posted this link earlier it's were I go the code and tell more about.it...
  5. H

    Advice how to get help to convert it to all to ASM?

    thank again Keith that's some what of what I was trying as I was migrating to the 16f676 ? marks and commits on anything I no sure on (really I'm sure sure of anything these days) #include "p16F676.inc" __CONFIG _CP_OFF & _WDT_OFF & _BODEN_OFF & _PWRTE_ON & _XT_OSC &...
  6. H

    Advice how to get help to convert it to all to ASM?

    that what I thought Keith1200rs what I need to know is how to do this in asm were it will compile here the whole code ****************************************************************** // // LANC controller // //********************************************************************** // //...
  7. H

    Advice how to get help to convert it to all to ASM?

    Re: Advice Thanks millwood I do agree with what your saying. I've found for "me" the best way to learn is to take something small that works and expand on it. each time I add a small part (baby steps if you will) I learn a "little more. Right now I don't have the confidence to reinvent the...
  8. H

    Advice how to get help to convert it to all to ASM?

    Advice I found some code on the internet that is suppose to do a big part of a a little hobby project I'm working on. problem: it's written in a combination of "C" but mostly asm. and is for a 16f876A PIC advice: how is the best way to get help to convert it to all asm. along with for a...
  9. H

    Crystal decoupling caps choice

    Re: Crystal caps thanks
  10. H

    Crystal decoupling caps choice

    Crystal caps I've been using the internal clock on my hobby Pic micro projects. but now have a need to use a external crystal ( digikey #x1045-nd) which the data sheet says use 10-20 pf load caps . but I'm not sure what type is best (ceramic,film etc. ) just wondering what most use thanks
  11. H

    Pic micro to Sony Lanc port

    looking for some help for this hobby project .operating a Sony camcorder via the Lanc port with a Pic micro if anyone had done this and would be willing to answer a few ?'s thanks:?:
  12. H

    How to increase wireless video system range?

    Re: wireless video help thanks again RF-OM I will replace the connectors and coax and give it a try
  13. H

    How to increase wireless video system range?

    Re: wireless video help sorry RF-OM this is the updated picture I had already replace the long coax with this one with screw connectors I'm not sure what ohm the coax is it's not marked (just a piece I found) are you saying I need to use 75 ohm? and or this type connector ok are do I need...
  14. H

    How to increase wireless video system range?

    Re: wireless video help thanks this is what I have https://img.inkfrog.com/click_enlarge1.php?image=IMG_1156.jpg&username=securitystar&aid=30800815 and this is how I using it I did shorten the coax from the TX to the antenna
  15. H

    How to increase wireless video system range?

    Re: wireless video help yes I'm using the ant. that cam with the RX/TX and yes they can "SEE" each other just thought that mite be a simple , cheap fix
  16. H

    How to increase wireless video system range?

    Re: wireless video help sorry I getting a range of a 100yrds I NEED 30 yrds more.
  17. H

    How to increase wireless video system range?

    I've built a homemade 1.2ghz wireless video surveillance system and I came up about 30yrds short on the range I needed what or some option to increase the range thanks
  18. H

    Atmega MCU to ELM624 to LanC

    I have been working with the elm624 using a Pic micro and maybe affor a little help
  19. H

    RF indicator for home surveillance project

    This is my 1st. Rf hobby project I'm working on a home surveillance project using a 1.2 mhz wireless video/audio transmitter/reciever, motion sensor and video camera. the transmitter will only be powered up when the cam is filming and the reciever will be on all the time. what I need is a...

Part and Inventory Search

Top