Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Search results

  1. S

    Recommend me a camera to interface with FPGA using VHDL

    Can anyone reccommend a camare module to interface with a FPGA with VHDL, or upload a project of this.
  2. S

    Sperm digital image processing

    I doing some work with the analysis of the morphology of a human spermatozoon (sperm, they have a oval shape head), I just goint to take a image from a microscope a do it a digital image processing. Can any one advice me what is the better way to do segmatation and the morphological...
  3. S

    Meyer probability 3.37 problem question

    meyer probability Any one has solved the 3.37 problem of the meyer probability and application, it says like this : 3.37 you have n baskets, each one has w white balls and b black balls, if you take out a ball in the firts basket and put in the second basket, and take out a ball of the...
  4. S

    PICSTART PLUS QUESTION

    How can I program a pic with the picstart plus with just the Hex file of the program(I do not have the code of the program).
  5. S

    How to get data send from PIC to PC's USB port using Visual Basic 6?

    I have a pic16C745 and a 18F2550 and I would like to send some data from the pic to the computer using the USB port. How can I collect this data using Visual basic 6?
  6. S

    Noise figure of a Harris Radio

    Any one know the noise figure of the Megastart or Costellation digital microwave radio at 7 or 8 Gigaherz.the manufacture is Harris Corp.
  7. S

    Looking for info about magnetic levitation

    magnetic levitation Any one has info about magnetic levitation, better it is low cost. is for a project.
  8. S

    Looking for small module that converts AC to DC

    AC to DC with a module Anyone know a module who can convert betwen 105 to 125 AC voltage (input voltage) to 5 to 15 DC voltage, fix or variable, with a output current greater that 1 amp. The size of the module requiere to be not so big.
  9. S

    Developing parser and scaner in Visual Basic

    Parser and scaner I want to make a compiler for a microprocessor I am doing in VHDL, a have the instruction set a I just want that the compiler take a txt file with the program , and give an another txt file with machine code. I think visual basic can make the interface part but it also...
  10. S

    Computer microphone jack pin out+amplifier

    I am desinig a amplifier for a computer microphone, I use a TL082 for the preamplifier and a class B power amplifier with TIP41C and TIP42C. but I am confused with the jack the microphone ,I don not which one is the signal. Do I need to bias the microphone. This amplifier will give a good...
  11. S

    Looking for AVR programmer schematic (Mega 16 and Mega 32)

    AVR programmer Any one has a AVR programmer schematic(mega 16 and mega 32 specially), whic software is better to use and better if is for the serial port.
  12. S

    How can I make a compiler program with a graphical interface

    Make a Compiler How can I make a compiler program, with a grafical interface, a empty sheet, where you write the code, it has to read the code a check his sintaxsys, and make a output file in a tx, it this is like tranlating the code, which languge is where any example or GNU program like...
  13. S

    Seven segment diplay in atmel avr mega16

    atmel mega16 How can I dispaly in a seven segment dispaly, with a atmel mega16 , several resistor and swithches, the numbers of 0 to 9, if a use the switches as a input for numbers in binary code, how can i read the 1 or 0 they send to me , in which register they will be located.
  14. S

    Help me configure NM7010A module for LAN using TCP

    I NEED HELP ON CONFIGURING THE NM7010A. I JUST CAN'T GET THE INT SIGNAL CLEARED. I AM USING THE I2C INTERFACE AND I SENT THE SYS_INIT COMMAND TO THE CR_C0 REGISTER. AFTER THAT, THE INTERRUPT SIGNAL WENT LOW (AS EXPECTED). BUT, WHEN I TRIED TO CLEAR THE INTERRUPT BY SENDING 0xFF TO THE IR...
  15. S

    Help me make a program to interface PIC/AVR using USB port

    How I can made a program who interface a pic or avr with the usb port , so I can send data and sound (analog sound), do I need to create a driver , with which program a can control the USB , how I get access to the usb .
  16. S

    Power supply for a FM transmitter.

    I want to build a power supply for a FM transmitter. I have build some power supply with voltage regulator IC(7809) and capacitors at the input and output pin of the IC, but the sound get in the receiver(radio), is the music with a high frecuency noise, but when a use a 9 Volts battery...
  17. S

    How to show some data on LCD YJ-162A using a microcontroller

    How can I show some data(numbers and letters) in the LCD YJ-162A 2 x 16 lines, from a microcontroller(PIC ,AVR )with a keypad or with serial interface.

Part and Inventory Search

Top