Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
need help Colour Maximite Computer
I have a Colour maximite computer I need to check the PIC32 ColourMM Firmware I connect the PICKIT2 to the CON7 in the Maximite and a box message is PICkit2 voltage level error check target & retry operation I close the box and the next message from the PICkit...
Can any one help me can I replace the MOS 6526 with a 6821 - Peripheral Interface Adapter which pin do I need to connect to the MOS 6526 this is in the commodore64 computer
If I can not use the 6821 which part can I replace the MOS 6526
I have a project Z80 mini board one input and one output the input has a 74LS244 which go to the Z80.rom,ram can I connect the key pad matrix to the input will it work or do I need a microcontroller project or project
there is a schematic look at the input port I need to connect a key pad...
Does anyone have any recommendations for microcontrollers with LCD controllers for QVGA (320x240)
I have try on the web site for QVGA LCD to buy no luck in Australia all so
I have a QVGA card as the connection are not the same and need a project microcontroller to display on a LCD Screen
I have a Schematic which I need to no how to connect to LCD there are 20 pin connection on the schematic and on the picture show the LCD connect. can any one help I can not get in contact with the person of this project this not my project there are more of the schematic
I have 2 picture of schematic can any one help me on parts
all I no is that some of the schematic I have with the board use 5 pin network resistor 4k7 ,10k .1k
on the keyboard schematic the crystal IC14 I need to no the MHZ and memory schematic a network resistor RN1 I need to no the resistor...
I have a dsPIC33FJ64GP802 and the PICKIT2 Programmer I made Adapter for the PICKIT2
1) pin 1 MCLR
2) pin 4 PGED
3) pin 5 PGEC
4) pin 8 VSS
5) pin 13 VDD
this is the Adapter to the PICKIT2 I hope this right it my first time do I need to connect to pin28 AVCC and pin 27 AVSS I have program the...